Skip to main content
IOP Conference Series: Materials Science and EngineeringVolume 966, Issue 1, 13 November 2020, Article number 01207515th International Conference on Industrial Manufacturing and Metallurgy, ICIMM 2020; Nizhny Tagil; Russian Federation; 18 June 2020 through 19 June 2020; Code 165176

Determination of cutting forces based on DMG MORI CTX300 ecoline CNC lathe drive power data(Conference Paper)(Open Access)

  Save all to author list
  • aUral Federal University Named after the First President of Russia B N Yeltsin, 19 Mira str., Yekaterinburg, 620000, Russian Federation
  • bUral Federal University Named after the First President of Russia B N Yeltsin, Nizhniy Tagil Technological Institute, 59, Krasnogvardeyskaya str., Nizhniy Tagil, 622000, Russian Federation

Abstract

Modern machine building needs demand for machines and control systems which provide higher accuracy of machining. For this purpose, setup methods are being researched and accuracy of machines and devices is being improved. The main topic of this paper is a tool path predistortion system which is necessary for improvement of shaft turning accuracy when a steady rest cannot be used on a CNC machines. Calculation of such tool path requires one to know the cutting force during turning on a CNC lathe. The research in question allowed to determine the dependence of cutting force during turning on the power consumed by the feed drive, cutting depth, cutting velocity, and feed value. An equation for further calculation applicable to a specific lathe in the turning process was derived. This equation serves as basis for adaptive turning of shafts and other parts with the aid of a mathematical model, which must account for the cutting force. Application of this formula in a CNC controlled lathe's parametric program will provide for higher accuracy of turning without special devices. © Published under licence by IOP Publishing Ltd.

  • ISSN: 17578981
  • Source Type: Conference Proceeding
  • Original language: English
  • DOI: 10.1088/1757-899X/966/1/012075
  • Document Type: Conference Paper
  • Volume Editors: Goman V.,Mironova M.
  • Publisher: IOP Publishing Ltd

  Starostin, A.P.; Ural Federal University Named after the First President of Russia B N Yeltsin, 19 Mira str., Yekaterinburg, Russian Federation;
© Copyright 2020 Elsevier B.V., All rights reserved.

Cited by 0 documents

Inform me when this document is cited in Scopus:
Set citation alert Set citation feed
{"topic":{"name":"Gages; Lathes; Air","id":43491,"uri":"Topic/43491","prominencePercentile":59.122612,"prominencePercentileString":"59.123","overallScholarlyOutput":0},"dig":"85a46d9f5582cf740ecdacb056f74b194df13c96bc264ed860c44bc4a1af4e60"}

SciVal Topic Prominence

Topic:
Prominence percentile: