Skip to main content
IOP Conference Series: Materials Science and EngineeringVolume 659, Issue 1, 2019, Article number 0120519th International Scientific Conference on Research and Development of Mechanical Elements and Systems, IRMES 2019; University of Kragujevac, Faculty of EngineeringKragujevac; Serbia; 5 September 2019 through 7 September 2019; Code 154497

Vehicles optimization regarding to requirements of recycling example: Bus dashboard(Conference Paper)(Open Access)

  Save all to author list
  • aUniversity of Kragujevac, Faculty of Engineering, Department for Motor Vehicles and IC Engines, Sestre Janjic 6, Kragujevac, 34000, Serbia
  • bDepartment of Urban Transport, University of Žilina, Slovakia
  • cUniversity of Kragujevac, Faculty of Engineering, Department for Mechanical Construction and Mechanization, Sestre Janjic 6, Kragujevac, 34000, Serbia

Abstract

It is very important during production to take into account the requirements regarding to recycling of vehicles. On this manner it is possible reuse of consisting materials and optimization of End-of-Life Vehicles. In European Union has defined targets to be achieved in the future for the recycling rate of vehicles at the end of their service cycle. Directive of the European Parliament and of the Council 2000/53/EC regulate waste management in the vehicle sector. This manuscript presents in global the international legislative in this field, regarding to the situation in Republic of Serbia. As contribution, during production of domestic city bus running on natural gas, performed the replace of material for bus dashboard on the basis of plastic and polyurethane foam, with ecological material with carbon inserts. The requirements for dismantling, reuse and recycling are integrated in the design of new bus. © Published under licence by IOP Publishing Ltd.

Indexed keywords

Engineering controlled terms:BusesFoamsRecyclingWaste management
Engineering uncontrolled termsEcological materialsEnd-of-Life VehiclesEuropean ParliamentEuropean unionPolyurethane FoamRecycling rateRepublic of SerbiaReuse and recycling
Engineering main heading:Solid wastes

Funding details

  • 1

    The paper is a result of the research within the project TR 35041 financed by the Ministry of Science and Technological Development of the Republic of Serbia.

  • ISSN: 17578981
  • Source Type: Conference Proceeding
  • Original language: English
  • DOI: 10.1088/1757-899X/659/1/012051
  • Document Type: Conference Paper
  • Volume Editors: Marjanovic N.
  • Publisher: Institute of Physics Publishing

  Milojevic, S.; University of Kragujevac, Faculty of Engineering, Department for Motor Vehicles and IC Engines, Sestre Janjic 6, Kragujevac, Serbia;
© Copyright 2019 Elsevier B.V., All rights reserved.

Cited by 4 documents

Oral, N. , Otuz, O. , Kocabıyık, R.K.
Characterization of mechanical and temperature effects on delamination and basic strength behaviors of PVC coated PUR foam substrate used in bus dashboard
(2024) Heliyon
Ortego, A. , Iglesias-Émbil, M. , Valero, A.
Disassemblability Assessment of Car Parts: Lessons Learned from an Ecodesign Perspective
(2024) Sustainability (Switzerland)
Milojević, S. , Glišović, J. , Savić, S.
Particulate Matter Emission and Air Pollution Reduction by Applying Variable Systems in Tribologically Optimized Diesel Engines for Vehicles in Road Traffic
(2024) Atmosphere
View details of all 4 citations
Inform me when this document is cited in Scopus:
Set citation alert Set citation feed
{"topic":{"name":"Compression Ratio; Internal Combustion Engine; Natural Gas","id":63634,"uri":"Topic/63634","prominencePercentile":41.139725,"prominencePercentileString":"41.140","overallScholarlyOutput":0},"dig":"6e524b2c27a008d29744f4291d668747c5f05359597d5b28c416004a350707a3"}

SciVal Topic Prominence

Topic:
Prominence percentile: