Skip to main content
FME TransactionsVolume 48, Issue 4, 2020, Pages 745-752

An Optimized and Virtual on-Machine Measurement Planning Model(Article)(Open Access)

  Save all to author list
  • aAssistant Professor University of Belgrade, Faculty of Mechanical Engineering, Department of Production Engineering, Serbia
  • bFaculty of Mechanical Engineering, Kraljice Marije 16, Belgrade 35, 11120, Serbia
  • cAssociate Professor University of Belgrade, Faculty of Mechanical Engineering, Department of Production Engineering, Serbia

Abstract

The specific needs of customers set requirements like flexibility and custom-made products, as well as quick placement of products on the markets. Mass customization responds to these requirements and imposes new demands inside manufacturing systems such as optimization and virtualization of machining and measurement processes. A contribution in that direction is presented in this paper, pertaining to development and verification an on-machine measurement planning model. The aim of the verification is to visualize collision check between the measuring head placed in the tool holder and the workpiece on the machine tool working table. The virtual on-machine measurement was realized on the configured virtual machine tool LOLA HBG80 in the CAD environment. The measurement path is generated by a new planning methodology, then optimized using ants colony, programed and verified by simulations through few examples of standard forms of tolerance. The output of the simulation process is the G-code for real on-machine measurement for prismatic parts of medium and rough dimensional accuracy. © 2020

Author keywords

ACOCAICAMon-machine measurementprismatic partssimulationvirtual

Funding details

Funding sponsor Funding number Acronym
Ministarstvo Prosvete, Nauke i Tehnološkog Razvoja200105,451-03-68/2020-14/200105MPNTR

  • 1

    The presented research was supported by the Ministry of Education, Science and Technological Development of the Republic of Serbia by contract no. 451-03-68/2020-14/200105.

  • ISSN: 14512092
  • Source Type: Journal
  • Original language: English
  • DOI: 10.5937/fme2004745S
  • Document Type: Article
  • Publisher: Belgrade University

  Stojadinovic, S.M.; Assistant Professor University of Belgrade, Faculty of Mechanical Engineering, Department of Production Engineering, Serbia;
© Copyright 2020 Elsevier B.V., All rights reserved.

Cited by 7 documents

Qi, R. , Dou, W. , Zhang, K.
A Method of Precision Measurement, Reverse and Error Evaluation for Complex Curved Surface | 一种复杂曲面的精密测量逆向与误差评定方法
(2024) Shenyang Jianzhu Daxue Xuebao (Ziran Kexue Ban)/Journal of Shenyang Jianzhu University (Natural Science)
Zhuang, Q. , Wan, N. , Guo, Y.
A state-of-the-art review on the research and application of on-machine measurement with a touch-trigger probe
(2024) Measurement: Journal of the International Measurement Confederation
Marjanovic, M.A. , Stojadinovic, S.M. , Zivanovic, S.T.
Modelling and Simulating the Digital Measuring Twin Based on CMM
(2023) Modelling
View details of all 7 citations
Inform me when this document is cited in Scopus:
Set citation alert Set citation feed
{"topic":{"name":"Coordinate Measuring Machine; Computer Aided Design; Uncertainty Analysis","id":12891,"uri":"Topic/12891","prominencePercentile":80.578575,"prominencePercentileString":"80.579","overallScholarlyOutput":0},"dig":"7f85badb7ec6a6c34e44e7c9a1206853cae900c566887b6adf3fd8d267123fac"}

SciVal Topic Prominence

Topic:
Prominence percentile: