Configuring a Class of Machines Based on Reconfigurable 2DOF Planar Parallel Mechanism(Conference Paper)
- aDepartment of Traffic, Mechanical and Protection Engineering, Academy of technical vocational studies, Nade Dimic 4, Belgrade, 11080, Serbia
- bDepartment for Production Engineering, University of Belgrade, Belgrade, 11000, Serbia
- cLOLA Institute, Kneza Viseslava 70A, Belgrade, 11030, Serbia
Abstract
The parallel 2DOF (Degrees of Freedom) mechanism presented in this paper has been the basis of much research by many authors. There are many significant results for the presented mechanism, and some of them are reported in this paper. The main goal of the research regarding the parallel mechanism is to create a hardware and software system that will be used to configure machine tools with three or more DOFs. The software system consists of two parts. One part is a set of applications intended for machine analysis and defining optimal configuration, and the other part is a control system of the machine adapted to the hardware of the machine, its configuration and purpose. For the presented mechanism, the kinematic model of the mechanism is described first. Based on the kinematic model, equations representing solutions of kinematics problems are derived. The derived equations are in a generalized form, with some variable parameters of the machine, and in such a form they correspond to every possible configuration of the reconfigurable mechanism. The equations are initially used to analyze some basic configurations, and then to analyze some configurations that have not been analyzed and presented so far. Also, equations in this form that are applicable for all possible configurations of the mechanism, are part of both parts of the software system. The final result of the presented procedures is one machine that has optimized parameters in accordance with the appropriate production process and with a configured control system that corresponds to the configuration of the machine. © 2022, The Author(s), under exclusive license to Springer Nature Switzerland AG.
Funding details
| Funding sponsor | Funding number | Acronym |
|---|---|---|
| 451-03-9/2021-14/200105,200105 |
-
1
Acknowledgements The presented research was supported by the Ministry of Education, Science and Technological Development of the Republic of Serbia by contract no. 451-03-9/2021-14/200105 dated 5 February 2021.
- ISSN: 23673370
- ISBN: 978-303086008-0
- Source Type: Book Series
- Original language: English
- DOI: 10.1007/978-3-030-86009-7_10
- Document Type: Conference Paper
- Volume Editors: Mitrovic N.,Mladenovic G.,Mitrovic A.
- Publisher: Springer Science and Business Media Deutschland GmbH
Vasilic, G.; Department of Traffic, Mechanical and Protection Engineering, Academy of technical vocational studies, Nade Dimic 4, Belgrade, Serbia;
© Copyright 2021 Elsevier B.V., All rights reserved.