

BACKGROUND: The fractional flow reserve (FFR) index has been widely accepted as a standard diagnostic method for identifying functional relevance of coronary stenosis. Since the invasive techniques used for its determination are associated with a certain risk of vascular injury, as well as with an increased cost, several non-invasive procedures have been developed. OBJECTIVE: The aim of this study was to compare FFR values for the coronary artery obtained by computational fluid dynamics (CFD) and coronary computed tomography angiography (CCTA). METHODS: Computation of FFR has been performed using both numerical and the analytical method. The numerical method employs CFD to solve the governing equations which relate to mass and momentum conservation (the continuity equation and the Navier-Stokes equations) as well as CCTA to generate the three-dimensional computational domain. After imposing the appropriate boundary conditions, the values of the pressure change are calculated and the FFR index is determined. Based on Bernoulli's law, the analytical method calculates the overall pressure drop across the stenosis in the coronary artery, enabling FFR determination. RESULTS: The clinical data for twenty patients who underwent invasive coronary angiography are used to validate the results obtained by using CFD (together with CCTA) simulation and analytical solution. The medically measured FFR compared to the analytical one differs by about 4%, while, the difference is about 2.6% when compared to the numerical FFR. For FFR values below 0.8 (which are considered to be associated with myocardial ischemia) the standard error has a value of 0.01201, while the standard deviation is 0.02081. For FFR values above 0.80, these values are slightly higher. Bland-Altman analysis showed that medical measurement and numerical FFR were in good agreement (SD = 0.0292, p< 0.0001). CONCLUSIONS: The analytically calculated FFR has a slightly lower coefficient of determination than the numerically computed FFR when compared with experimental one. However, it can still give a reliable answer to the question of whether patients need a stent, bypass surgery or only drug treatment and it requires a significantly lower computation time. © 2023 - IOS Press. All rights reserved.
| EMTREE medical terms: | analytic methodArticleclinical studycomputational fluid dynamicscomputed tomographic angiographycontinuity equationcontrolled studycoronary angiographycoronary artery blood flowcoronary stenosisenergy conservationfractional flow reserveheart muscle ischemiahumanhyperemiaimage processingintermethod comparisonlawmathematical computingmeasurement accuracymicrocirculationnavier stoke equationright coronary arteryvenous pressurecoronary artery diseasecoronary blood vesselcoronary stenosisdiagnostic imagingpredictive valueproceduresretrospective studyseverity of illness indexstenosis, occlusion and obstruction |
|---|---|
| MeSH: | Constriction, PathologicCoronary AngiographyCoronary Artery DiseaseCoronary StenosisCoronary VesselsFractional Flow Reserve, MyocardialHumansPredictive Value of TestsRetrospective StudiesSeverity of Illness Index |
| Funding sponsor | Funding number | Acronym |
|---|---|---|
| 451-03-68/2022-14/200378 | ||
| Horizon 2020 Framework Programme See opportunities by H2020 | 952603 | H2020 |
| European Commission See opportunities by EC | EC | |
| Ministarstvo Prosvete, Nauke i Tehnološkog Razvoja | 451-03-68/2022-14/200107 | MPNTR |
The research was funded by the Ministry of Education, Science and Technological Development of the Republic of Serbia, contract number 451-03-68/2022-14/200107 (Faculty of Engineering, University of Kragujevac) and contract number 451-03-68/2022-14/200378 (Institute for Information Technologies, University of Kragujevac). This research was furthermore supported by a project that received funding from the European Union’s Horizon 2020 grant agreement No. 952603 – SGABU. This article reflects only the authors’ views. The Commission is not responsible for any use that may be made of the information it contains.
The research was funded by the Ministry of Education, Science and Technological Development of the Republic of Serbia, contract number 451-03-68/2022-14/200107 (Faculty of Engineering, University of Kragujevac) and contract number 451-03-68/2022-14/200378 (Institute for Information Technologies, University of Kragujevac). This research was furthermore supported by a project that received funding from the European Union's Horizon 2020 grant agreement No. 952603 SGABU. This article reflects only the authors views. The Commission is not responsible for any use that may be made of the information it contains.
Milovanovic, A.; Institute for Information Technologies, University of Kragujevac, Kragujevac, Serbia;
© Copyright 2023 Elsevier B.V., All rights reserved.