Implementation of a Virtual Instrument in the System for Measuring Forces and Temperatures in the Milling Process(Article)(Open Access)
- aFaculty of Technical Sciences, University of Novi Sad, Trg Dositeja Obradovica 6, Novi Sad, 21000, Serbia
- bFaculty of Mechanical Engineering, University of Maribor, Smetanova ulica 17, Maribor, 2000, Slovenia
Abstract
This study presents the development of a measurement acquisition system for force measurement and temperature cutting using virtual instrumentation. The developed measurement chain enables very efficient, accurate, reliable and fast data collection during the measurement process. The presented acquisition system was developed for the face milling process, but its application is also intended for turning or grinding processes. Emphasis is placed on the creation and description of a software solution in order to manage hardware measuring sensors. Two versions of the virtual instrument are presented. The first one is based on the measurement of three components of cutting forces, obtained by means of a piezoelectric dynamometer. And the second one is upgraded with another channel that represents the temperature change record obtained by the thermocouple. At the end, the experimental results for face milling are shown. A graphical diagram obtained based on some of the data generated by the innovative measuring chain applied to the milling process is presented. © 2024 by the authors.
Indexed keywords
| Engineering controlled terms: | Digital instrumentsGrinding (machining)Thermocouples |
|---|---|
| Engineering uncontrolled terms | AcquisitionCutting forcesData collectionFace-millingForces measurementsMeasurement acquisition systemMeasurement processMilling processVirtual instrumentVirtual Instrumentation |
| Engineering main heading: | Milling (machining) |
Funding details
| Funding sponsor | Funding number | Acronym |
|---|---|---|
| 451-03-65/2024-03/200156 | ||
| 01-3394/1 |
-
1
This research has been supported by the Ministry of Science, Technological Development and Innovation (Contract No. 451-03-65/2024-03/200156) and the Faculty of Technical Sciences, University of Novi Sad through the project \u201CScientific and Artistic Research Work of Researchers in Teaching and Associate Positions at the Faculty of Technical Sciences, University of Novi Sad\u201D (No. 01-3394/1).
- ISSN: 22279717
- Source Type: Journal
- Original language: English
- DOI: 10.3390/pr12071344
- Document Type: Article
- Publisher: Multidisciplinary Digital Publishing Institute (MDPI)
Savković, B.; Faculty of Technical Sciences, University of Novi Sad, Trg Dositeja Obradovica 6, Novi Sad, Serbia;
© Copyright 2024 Elsevier B.V., All rights reserved.
Cited by 1 document
(2024) Journal of Circuits, Systems and Computers